£20.00
Category:

Bluetooth Tag Anti-hijak

The TAG is a small proximity fob that pairs with the LockCar devices over Bluetooth

Fast Installation

Fast Delivery

In stock

The TAG It does Hands-free disarming
As you approach the car with the TAG in your pocket or on your keys, the system detects it automatically and disarms the immobiliser, no PIN entry, no need to open the app. The engine is ready to start the moment you get in.

The TAG It does Anti-hijack protection
Anti-hijack protection while driving
This is the less obvious but more important part: the system doesn’t just check for the TAG once, at start-up. It keeps checking for it continuously while the car is in motion. If the TAG suddenly drops out of range while driving, for example if someone forces you out of the vehicle, the system can trigger an anti-hijack response, configured according to your vehicle.
Why this matters compared to a PIN or a button sequence:
Nothing to remember and nothing to press
Nothing to remember and nothing to press every time you start the car
Without the TAG present, the engine stays blocked, even if someone has the car’s original key or has cloned/relayed its signal, because the TAG check is completely separate from the vehicle’s own key system
Without the TAG, you can still control the system from the smartphone app (Android or iOS)

Reviews

There are no reviews yet.

Be the first to review “Bluetooth Tag Anti-hijak”

Your email address will not be published. Required fields are marked *

Standard Configurations

WIRE DIALOG ENERGY EFFICIENCY ANTI-HIJACK EXTENDED TEMP WIRELESS IMMOBILISER POWER SWITCHES LIVE CAMERA VIEW REMOTE ACCESS

WIRE DIALOG

ENERGY EFFICIENCY

ANTI-HIJACK

EXTENDED TEMP

WIRELESS IMMOBILISER

POWER SWITCHES

LIVE CAMERA VIEW

REMOTE ACCESS

This is the classic communication between MCU and immobiliser via high-power cable that withstands up to 30A, capable of interrupting power circuits such as analog circuits for all vehicle types. Supports 12/24V installation. LockCar systems have very precise energy consumption management. Due to patented progressive technologies and firmware solutions, LockCar guarantees low energy consumption, saving sufficient car battery charge in arm mode, and preventing battery drainage. LockCar protects against theft and hijacking with safe engine blocking in motion if the tag is not detected. Designed to withstand high temperatures up to 85°C with overheat protection shutdown, and in winter it has the capability to defrost the windshield in front of the camera for clear view if frozen. This function facilitates communication between MCU and immobiliser via WiFi without connection cables, improving device concealment. Power relay up to 20Amp which can cut power load currents. With this function, cameras from MCU can be activated and viewed remotely via 4G connectivity. This configuration allows remote access to devices for communication from a distance, and for remote control and modification of settings, lockings, startings, and vehicle immobilisations.

Advanced Configurations

MOTION DETECTION HANDS-FREE TRUST DEVICE WI-FI TAG APP CONTROL FACE ID STOP ENGINE VALET

MOTION DETECTION

HANDS-FREE

TRUST DEVICE

WI-FI TAG

APP CONTROL

FACE ID

STOP ENGINE

VALET

LockCar will block an engine by motion detection if owner did not pass authorization. This function allows correct remote engine start without security disarming. LockCar will disarm security when owner approaches a car to wireless tag detection area. LockCar will know that the trust device is in the car and will use it to disarm the vehicle. The Wi-Fi tag is designed to identify each individual driver and facilitate access and authorization of starting. Using the phone, you can control, configure and command functions of the immobiliser device. FACE ID can be used to identify the person behind the wheel, whether they are authorized or, depending on this, whether the car starts or not. STOP engine can be configured to operate both remotely and locally from the app. The valet function offers the possibility to program the car for a specific duration and limited authorization.

Premium Configurations

SUBSCRIPTION SMART GPS TRACKER HYPER BLUETOOTH MICROPHONE SPEAKER ADDITIONAL RELAY

SUBSCRIPTION

SMART

GPS TRACKER

HYPER

BLUETOOTH

MICROPHONE

SPEAKER

ADDITIONAL RELAY

Subscription is required when the user wants remote access, real-time notifications, access to live cameras, and CLOUD. The smart function offers the possibility to configure the MCU device to broadcast Wi-Fi internet to the user as a Wi-Fi internet modem. The device stores both locally and in the cloud route history, live location and direction reports, and speed. GPS+GLONASS receiver provides unique sensitivity and almost instant determination of exact coordinates even in the most severe environmental conditions. Bluetooth module usage function for app, and device configuration. LockCar MCU has a microphone that helps record sound for surveillance camera footage. LockCar MCU has a speaker to play directives and alarms according to user configurations, it can speak, give directions about speed cameras on highways. Additional relay can be configured to turn off or control circuits with up to 20A consumption.

Technical Specifications

Type
Start Engine Block
Function
Hands-free Immobiliser
Brand Name
LockCar
Device Size
48x51x1cm