Car Immobiliser Birmingham Selly Selly Oak

Looking for a Car Immobiliser Birmingham Selly Oak drivers can rely on? Selly Oak and Bournbrook, with high student and commuter populations, see vehicle theft including mopeds, small cars, and vans. LockCar’s mobile installation brings professional relay immobiliser protection to your Selly Oak location — fitted at your address, with no need to leave your vehicle anywhere.

Car Immobiliser Birmingham Selly: How Relay Immobilisers Work

A relay immobiliser is a hidden security device that interrupts the signals thieves use to start your vehicle. Modern keyless cars are commonly targeted with relay attacks, where a signal booster is used to fool the car into thinking the key is nearby. A professionally fitted immobiliser blocks that method at source.

Unlike a factory alarm, a relay immobiliser is invisible. There is no dashboard light, no obvious siren box and nothing for a thief to spot through the window. The vehicle simply will not start unless the correct proximity tag or app authorisation is present. This is why the IC3ST and similar systems are so effective in built-up areas like Selly Oak, where cars are often parked on streets, driveways and shared student parking.

Mobile Installation Across Selly Oak and B29

LockCar is a UK vehicle security manufacturer and approved installer. We come to you, whether you are in Selly Oak itself, Bournbrook, or the surrounding B29 postcodes. That means no garage drop-off, no waiting rooms and no need to arrange time off work.

What Happens During a Selly Oak Immobiliser Fitting

The process is straightforward and usually completed in a single visit:

1. Booking and vehicle check. You contact us by WhatsApp or phone with your vehicle details and your Selly Oak location. We confirm the correct system for your car, van or commercial vehicle.

2. Mobile arrival. Our approved installer arrives at your address in Selly Oak or the wider B29 area with the immobiliser unit, wiring and fitting tools.

3. Concealed installation. The relay immobiliser is wired into your vehicle’s existing security circuit and hidden out of sight. All connections are soldered and insulated for a factory-standard finish.

4. Pairing and testing. Your proximity tag and app are paired to the system. We test starting, immobilisation and motion alerts with you present so you can see exactly how it works.

5. Handover. You keep the tag, the app is set up on your phone, and you drive away protected. There is no subscription on the IC3ST or ONE systems.

What Is Included and What You Pay

Every LockCar installation includes the immobiliser hardware, professional fitting at your Selly Oak address, app setup and proximity tag pairing. Prices shown are the fully fitted prices for this area:

IC3ST — £139 for the unit, from £300 fully fitted in Selly Oak. Includes relay protection, app control, proximity tag and motion alerts. 20A rated, so it suits vans and commercial vehicles as well as cars.

ONE — £199 for the unit, combining a dashcam with a relay immobiliser. Includes 24/7 recording, local SD storage and relay protection, with no subscription.

Both systems are designed and supplied by LockCar, a UK manufacturer of vehicle security products. Because we are the manufacturer, we can support the system long after fitting.

Areas We Cover Around Selly Oak

Our mobile installers cover Selly Oak and the surrounding Birmingham areas, including Bournbrook and the B29 postcode district. If you are nearby and not sure whether we reach you, send a message with your postcode and we will confirm.

We also fit immobilisers across other Birmingham areas. You can see our wider coverage on the Car Immobiliser Birmingham page, or read more about the fitting service on our Car Immobiliser Fitting Birmingham page.

Frequently Asked Questions

How long does a Car Immobiliser Birmingham Selly fitting take?
Most installations are completed in a single visit at your address. The exact time depends on your vehicle, and we confirm this when you book.

Will a relay immobiliser stop keyless car theft?
Yes. A relay immobiliser blocks the signal methods used in relay attacks, so the vehicle cannot be started or driven away without your tag or app authorisation.

Do I need a subscription?
No. The IC3ST and ONE systems work without a subscription. The app and proximity tag are included with the fitting.

Can you fit an immobiliser to a van or commercial vehicle?
Yes. The IC3ST is 20A rated, which makes it suitable for vans and commercial vehicles as well as cars.

Do you cover Bournbrook and other B29 postcodes?
Yes. We cover Selly Oak, Bournbrook and the B29 postcode area with our mobile installation service.

How do I book a fitting in Selly Oak?
Message us on WhatsApp or call with your vehicle details and your Selly Oak address, and we will arrange a convenient time.